Price: $78.99
(as of Mar 03, 2022 20:38:27 UTC – Details)
Product Description
High-Quality Copper Wire
Wire specification: AWG13 (2.5mm²)
30A Wind Solar Hybrid Controller
Parameter
Protection Class: IP 67
Max Discharging Current：30 A
System voltage: 12/24V auto match for battery
Wind turbine power：400W(12V)/800W(24V)
Solar Panel power:500W(12V)/1000W(24V)
Wind Generator Braking Voltage:14.5V/29V
Wind Generator Recover Voltage:13.2V/26.4V
Indicator light conditions
1. Battery capacity, discharging indicator(light on indicates the battery condition)
2. Battery charging indicator(light on indicates charging)
3. Controller power-on indicator(light on indicates the battery is connected properly)
4. Brake, fault, overcharge, over-discharge protection(light on indicates warning condition)
5. Wind turbine charging indicator(light on indicates the wind turbine is working)
Good Waterproof Performance
1.The fully waterproof protection which grade reach into IP67.
2.Charge controller for wind and solar can work steadily even in very humid environment.
3.The wind solar hybrid controller is small size with light weight, easy to install.
Good Heat Dissipation
Wind Solar charge controller use Aluminum alloy shell and Therming Dissipine Structure with good heat dissipation. The rectification and brake circuit part has adopted integrated module design, whatever heat dissipation or reliability, all further advanced than the traditional design.
1.(-Scope of use-): Hybrid charge controller 12/24V auto match for max 800w wind generator and max 1000w solar panels for wind & solar complementary system.
2.(-Operational system-): The charge controller use PWM technology by MOS tube in series which make solar and wind charge more efficient. Especially MCT charging function tracks the maximum current of the solar panel in real time.
3.(-Protection function-): Over charge voltage/under voltage & Over load voltage Protection, battery reverse connects and open circuit protection, Lightning Protection, etc.
4.(-Good Heat Dissipation-)：Wind controller use Aluminum alloy shell with multi-edge bottom plate design , which increase the heat dissipation area. So the controller keep in an optimal heat dissipation state for a long time.
Front View
Right Side View
Left Side View
Back Side View
Wiring Instructions:
1. Firstly, connect the positive pole of the load, battery and solar panel to the red line of the controller.
2. Then connect to the load’s yellow wire of the negative pole.
3. Then connect the negative pole of the battery to the black line of the controller.
4. Connect the negative pole of the solar panel to the blue line of the controller
5. Connect the three-phase AC voltage input line of the controller to the three-phase voltage output line(green line )of the wind turbine.
6. After the entire connection is completed, please wrap the connectors with waterproof tape to avoid water ingress.
★(-Scope of use-): Hybrid charge controller 12/24V auto match for max 800w wind generator and max 1000w solar panels for wind&solar complementary system.
★(-Operational system-): The charge controller use PWM technology by MOS tube in series which make solar and wind charge more efficient. Especially MCT charging function tracks the maximum current of the solar panel in real time.
★(-Good Heat Dissipation-)：Wind controller use Aluminum alloy shell with multi-edge bottom plate design , which increase the heat dissipation area. So the controller keep in an optimal heat dissipation state for a long time.
★(-IP67 Waterproof-): The fully waterproof protection which grade reach into IP67. Charge controller for wind and solar can work steadily even in very humid environment.
★(-Protection function-): Over charge voltage/under voltage & Over load voltage Protection, battery reverse connects and open circuit protection, Lightning Protection, etc.